AT91SAM9260 USB DRIVER

In contrary to the rule stated above, backslashes can be used here. In any case make sure, that the Install Directory is located within the Build Directory and also check, that arm-gcc platform has been selected. This way the correct repository will be loaded. It is recommended to stick with the defaults shown. At this point it is important to check, that the configuration is loaded from the correct installation directory. Hardware Firmware Tools Download Community. Check the log window to make sure, that the repository and the configuration file had been loaded from the current installation directory.

Uploader: Kazrazahn
Date Added: 8 October 2015
File Size: 10.25 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 15114
Price: Free* [*Free Regsitration Required]

On the third page the build environment has to be specified.

If unsure, click Abort and specify another application directory in the Configurator at91sam99260. Software development can be done on a Windows or Linux system.

GadgetPC, AT91SAM (ARM9) board, 4x USB Host, 1

Click OK to start this build. It may take some time to finish.

First some Configurator settings need to be specified. For now, just continue. Expand the PATH environment, change to the directory that contains our events sample and clean-up any previous build by typing the follwing three commands. Finally terminate the Configurator. Start a terminal emulator like Hyperterm Windows default or TeraTerm much better. You may click the button Compare sent file with memory to make sure, that the upload really worked.

  KM266PRO-8235 AUDIO DRIVER

Remember the log in the main window? The last page provides a temporary solution to the currently not existing application wizard. Hardware Firmware Tools Download Community. This way the correct repository will be loaded. Check the output in the log window. Thus no specific programming hardware is required to program the final application into the on-chip flash memory.

Serial port settings are ,8,n,1.

Nut/OS on the AT91SAM9260 EK

A tabbed dialog with four pages appears. Check the log window to make sure, that the repository and the configuration file had been loaded from the current installation directory. In the first place we need the target board. On the first page, titled Repository you can specify the ueb of the repository file.

You should now see some output in the terminal emulator’s output window. These settings are stored in the Windows repository. At91sam92660 this point it is important to check, that the configuration is loaded from the correct installation directory. In order to start the uploaded code, enter go 0x in the script window.

  HP 2055DN PRINTER DRIVER DOWNLOAD

AT91SAM | How to communicate with USB in AT91SAM in c with linux?

It depends on your programmer or bootloader software, which one will be usefull. A confirmation dialog appears, which unfortunately doesn’t clearly ubs the risk. Requirements In the first place we need the target board.

Click OK to confirm all settings and return to the main window. However, at the time of this writing, only Windows had been fully tested for this CPU.

Open a command line window, for example by executing cmd. In any case make sure, that the Install Directory is located within the Build Directory and also check, that arm-gcc platform has been selected.

One is in Intel hex format events. The programmer selection can be ignored. In contrary to the rule stated above, backslashes can be used here. If the wrong repository had been loaded, you can correct this here.