The sustained speed is what I gave you but I called it continuous. This the is the last board in an evolution of skt boards that have been around since the inception of the P4. Here is the motherboard, boxed, as we received it. A good day editing beats a bad one anyday. With this setting we raised the FSB all the way up to , though at one point we did raise the vcore.

Uploader: Tataxe
Date Added: 17 December 2004
File Size: 45.91 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 57524
Price: Free* [*Free Regsitration Required]

For what it is the P4P SE is a very solid board with only a few minor faults and no major problems. Because the sustained rates were the same, I probably wouldn’t get better performance from SATA-II for my use but that doesn’t mean in another use the performance wouldn’t be much better.

This is an program which painlessly updates your BIOS at your request. Sat, Jul 1 6: It’s the noise penetrating the cable and causing so much error-correcting overhead. This means prices are falling even though the performance of socket hardware is still very close to that of other platforms.

Fri, Jun 30 2: I suspect this advantage disapears if the head has to hunt all over the platter-the logic of frequent defragmentation factors in again. Otherwise, there were no problems at all. Installing and using the new SATA drive should be a breeze and you’ll really like the performance. It only has a 1-yr. I have 1 sata drive on a different machine with the P4P and it seems to work fine so I am not sure it matters for people like me who edit SD Larry as long as I live I will remember you.


After this point we slackened the memory timings from to 2.

Asus P4P Motherboard | eBay

Aata switched to it for capture and render and Liquid’s performance got a lot better. Sat, Jul 1 4: With this superb memory we overclocked the system in increments of 2mhz from up to In this range we ran the CPU at stock voltage, and the memory at 1. You can see that the board has built in Gigabyte Lan, integrated six-channel audio, four available USB2. It will work just fine.

ASUS P4P800 SE – motherboard – ATX – Socket 478 – i865PE Series

They are nicely situated about two inches below the memory. However the perpendicular drives seem to gain an inherent advantage due to the increased density on the platter.

The 12v power connector was located in a somewhat strange spot, below and to the left of the processor but this was not a problem, though aesthetically it is not the best spot. These latency timings are not terrible but will make for lost performance if you forget to check.

The “speed” has as much to do with physically moving a head as it does with transferring bits.


I boot from SATA 1 connector. While these are no doubt the wave of the future they have yet to substantially beat out the performance of Northwood-based computers dollar-for-dollar. The socket is placed along the top of the board which is p4p80 good for clearance when using a larger heatsinks.

This is about what the findings have been over our experience with skt motherboards, zsus there is usually a surprise to two when the Springdale beats the Canterwood. I don’t want to have to replace that drive in a few months.

Ass articles I have read it is the mechanical components and data arrangement methods in drives that are the limiting factor at present. First the FSB speed at stock was Here are the two SATA ports. This can be done without leaving the comfort of Windows.

The MoBo controller figures hugely in the real world stats. These modules are super fast and should be able to run up to and FSB speed of mhz.